There are a number of things to keep in mind when doing an RV roof repair, such as the actual procedure that is going to be taken, as well as making sure that the finished job is going to work for the long term. Any type of mobile home roof repair will generally require that you are on top of the roof, so you must also keep safety in mind. This is not only true if you’re on a smaller Fleetwood trailer, but it is also true if you’re doing a larger rubber roof repair on a mobile home. Regardless of what it is that you need to do, however, understanding a few basics about RV roof repair can help you to get the job done right.
There are a few basic areas that will be trouble spots, more than likely, whenever you’re doing this type of a repair job. Although it is possible for you to have some direct damage as a result of something hitting the roof, more than likely it is just going to be a matter of cracks appearing over the course of time. For example, if you have a Fleetwood RV that you travel in regularly, it is going to be exposed to a number of different weather conditions and that can easily dry the caulking out, or cause the finished to crack at the seams. These are the typical places that you will look for difficulty.
Once you have identified the area where the RV roof repair must take place, it is time for you to gather your materials. These will typically include a pair of tin shears, a large sheet of aluminum, a can of roof repair paste, a putty knife and either a good sander or a wire wheel. The most important thing about the project is that you make sure that anything that is in the area that is being repaired is cleaned properly. You must remove all of the old finish in order for the new finish to adhere properly.
The next thing that you do is to cut the replacement piece slightly larger than the area that you are replacing. This is true not only of a rubber repair, but also whenever you’re putting down aluminum. Apply the paste liberally and then put the new piece down, taking caution to smooth it out properly to remove air bubbles. After attaching it properly, you will cover it over with additional paste in order to completely seal it.
This type of RV roof repair is not always going to be the prettiest job, but it is going to be one that will last for the long term. Regardless if you are doing a mobile home repair on an aluminum roof or if you need to do some rubber roof repair, making sure that it is sealed properly is going to make a difference as to whether it will leak over the long term or not. Not only does this work well on a small Fleetwood trailer, it also works on the larger trailer homes, so always be prepared to do one of these fixes when the need arises.